BEURER EM 59 TENS/EMS device with heat function

BEURER EM 59 TENS/EMS device with heat function

RM596.00

MDA Reg. No: GB8726123-115870

2 in stock

SKU: KBR_EM59-1 Category: Brand:

Note: Get Special Price with this coupon beurermy59

Functions:
Transcutaneous electrical nerve stimulation (TENS)
Electrical muscle stimulation (EMS)
TENS/EMS and heat function can be used in parallel and/or individually

  • 4-in-1 Function: TENS, EMS, Massage, Heat
  • 2 separately adjustable channels with 4 self-adhesive electrodes (electrodes included; size 45 x 45 mm)
  • 64 pre-programmed applications (TENS/EMS/Massage) / 6 individualizable programs (TENS/EMS)
  • "Doctor´s-Function": ensuring ideal coordination to your personal therapy programme
  • Timer function (adjustable between 5-100 minutes)
  • Inverse LCD with electrode position display for easy programme selection and electrode placement
  • Ergonomic design, with belt clip
  • Safety switch-off
  • Rechargeable battery: 2000 mAh, 3,7V

Medical product
Output voltage: max. 100Vp-p (500 Ohm load)
Output current: max. 200 mA p-p (500 Ohm load)
Output frequency: 1-150 Hz
Pulse width: 50-450 μs per pulse
Pulse form: dual phase square pulses
With detailed instruction manual (inclusive application possibilities)
Product measurements (LxWxH): 139 x 66 x 26 mm (inkl. Clip)
Product weight: approx. 125 g (with belt clip, without batteries)

Warranty: 5 years

How does a TENS device work and how do you use it correctly?

How it works

The machine uses electrical pulses to relieve pain. It transmits small electrical pulses through the skin which
can block pain receptors to suppress pain signals in the nerve fibres and reduce pain. Pain is alleviated by the
suppression of pain signals in the nerve fibres, among other mechanisms. This is especially true of high-frequency pulses.
At the same time, the release of the body’s own endorphins is increased, whereby these factors reduce the sensation
of pain due to their effects within the central nervous system. The method has been scientifically substantiated and
approved as a form of medical treatment.

How do you use a TENS machine?

The first step is to always read the instructions carefully. Not only will this make the device easier to use but you’ll also be sure you’re getting the most from your TENS machine.

Then carefully apply the gel pads to the electrodes and cautiously remove the protective film. Ensure that the edge of the gel
pad does not protrude over the electrode. Gel pads that are not applied flush on the electrode do not impact on their functionality.

Then position the electrodes on the affected area on the body and switch on the device. The electrodes should be placed on clean
and dry skin. Avoid placing them on open wounds or scars. Finally, make sure that the electrodes are positioned correctly.

Now, select a program and start the treatment. Adjust the intensity to a comfortable level. The intensity can be adjusted
depending on how much pain you are feeling.

Important! It’s always best to discuss TENS treatment with your GP or health professional. Not only can they confirm TENS is the right
treatment for you, but they may also be able to advise you on the best way to use a TENS machine to suit your pain condition.

Placement of the electrodes

Important to the success of TENS pain therapy is electrode placement. You’ll often find a positioning guide in the instruction manual,
or your TENS machine may have an on-screen positioning guide. If you feel unsure at all, your GP or health professional will be able to help.

Electrode distance

The greater the distance between the electrodes, the larger is the stimulated tissue volume. This applies both to the area and the depth of
the tissue volume. At the same time, the stimulation intensity applied to the tissue decreases the further the electrodes are apart. As a result,
greater distances between electrodes mean that a larger tissue volume is stimulated, albeit less intensively. In such a case, you must increase
the pulse intensity to boost the stimulation.

The following guidelines can help you find the best electrode distance for you:

  • Recommended distance between electrodes is around 5–15 cm
  • At distances below 5 cm, the device primarily stimulates surface structures intensively
  • At distances over 15 cm, large areas and deep structures are stimulated very weakly

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

WARRANTY

The product as detailed below is warranted from defects in parts and workmanship from the date of purchase by Kinsmedic Sdn Bhd (the company):

Beurer – 36 mths, except BPM, Thermometer, Nebulizer, TENS/EMS, Underblanket & Weighing Scale – 60 mths, Fora – 60 mths, Choicemmed – 24 mths, Charder/Sony/Spirit/Tuttnauer/Visiofocus – 12 mths

Warranty coverage is subject to the following terms & conditions:

  1. The company will repair or replace free of charge any defective parts arising from normal usage.
  2. This warranty does not cover ordinary wear & tear, including battery leakage, cuffs & other consumables.
  3. The Company will not accept liability for any damage caused by misuse, and unauthorized modification or repair to the product. This, include unauthorized usage of non-compliant AC adaptors.
  4. Lower portion of this card must be fully completed and mailed to the Company within ten (10) days of purchase.
  5. The warranty is only valid if the product is purchased new from the Company or through its authorized dealer for use in Malaysia.
  6. Products eligible for warranty claim must be returned with original warranty card and proof of purchase. (i.e. receipt)